Nu1C - Australia’s Leading Online Computer, Computer Parts, Smartphone, Software, & Office Business Equipment Store

CISCO (WS-X6848-TX-2T=) C6K 48-PORT 10/100/1000 GE MOD: FABRIC ENABLED RJ-45 DFC4 S

$32,563.38 (exc. GST)

Product Details

Cisco WS-X6848-TX-2T — Catalyst 6800 Series 48-Port 1 Gigabit Copper Ethernet Module with DFC4

This brand new Cisco Catalyst 6800 series 48-Port 1 Gigabit Copper Ethernet Module (WS-X6848-TX-2T) supports hardware-based multicast replication, quality of service (QoS), access control lists (ACLs), jumbo frames, and low latency to enable secure and predictable performance for bandwidth-intensive applications. It consists of 4 port groups of 4 ports each. Users can operate each port group in either oversubscription mode or performance mode, providing the flexibility to use some ports for connection to servers and other ports for interconnection of switches.

Brand: Cisco Systems
Series: Catalyst 6800 Series
Model: WS-X6848-TX-2T
Product Type: Gigabit Copper Ethernet Module w/ DFC4
Form Factor: Plug-in Module
Condition: Brand New / Sealed
Lead Time: 7-10 days
Technical Specs:

Ports: 48
Supervisor Engines Supported: Cisco Catalyst® 6500 Supervisor Engine 2T and 2TXL
Chassis Supported:
Cisco Catalyst 6500 E-Series chassis — 6503E, 6504E, 6506E, 6509E, and 6509-V-E
NOT SUPPORTED: Non-E Series chassis
Slot Requirements: When configured correctly, this ethernet copper module (WS-X6848-TX-2T) can occupy any slot in a Cisco Catalyst 6503E, 6504E, 6506E, 6509E and 6509-V-E chassis. Additionally, this module can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E chassis.
Distributed Forwarding & Performance: This copper ethernet module (WS-X6848-TX-2T) comes equipped with DFC4 daughter cards, designed to deliver optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding
Standard Protocols: IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ak, IEEE 802.3aq, and IEEE 802.3an
Safety Standards: UL 60950-1 , CAN/CSA C22.2 No. 60950 , EN 60950-1 , IEC 60950-1 , AS/NZS 60950-1 , IEC 60825 Class 1 , EN 60825 Class 1 , 21CFR 1040
EMC Standards: FCC Part 15 (CFR 47) Class A , ICES-003 Class A , VCCI Class A , EN55022 Class A , EN55024 , CISPR24 , CISPR 22 Class A , AS/NZS CISPR 22 Class A , ETS 300 386 , KN 22 Class A , EN 50082-1 , EN61000-3-2 , EN61000-3-3 , EN61000-6-1 , CNS13438 Class A , KN6100 -4 Series
Network management: ETHERLIKE-MIB (RFC 1643) , IF-MIB (RFC 1573) , Bridge MIB (RFC 1493) , CISCO-STACK-MIB , CISCO-VTP-MIB , CISCO-CDP-MIB , RMON MIB (RFC 1757) , CISCO-PAGP-MIB , CISCO-STP-EXTENSIONS-MIB , CISCO-VLAN-BRIDGE-MIB , CISCO-VLAN-MEMBERSHIP-MIB , ENTITY-MIB (RFC 2037) , HC-RMON , RFC1213-MIB (MIB-II) , SMON-MIB
Power Requirements: 405 Watts
Dimensions:

Height: 1.20 inches (3.0 cm)
Width: 14.4 inches (35.6 cm)
Depth: 16.0 inches (40.6 cm)
Weight: 13.6 lbs. (6.16 kg)
Note: This module occupies one slot in the Cisco Catalyst 6500 E-Series chassis
System Indicators:

Status Indicators:
Red — Faulty
Green — Operational
Orange — Module is booting
Link Indicators:
Orange — Port is disabled
Green — Port is enabled and connected
Off — Port is enabled, but not connected
Environmental Guidelines:

Humidity Range Operating: 10% to 90% Noncondensing Humidity
Operating Temp.: 32°—104°F (0°–40° C) (Exceeding 130°F is not recommended)
Storage Temp.: -40°—167°F (-40°–75° C)
Operating Altitude: -500 to 6,500 ft is the recommended range. Exceeding 10,000 ft is not recommended.
Additional Information
Type of Product Network Equipment
Brand Cisco
Condition New
Standard Warranty 90 days
Model # WS-X6848-TX-2T
Manufacturer Part # WS-X6848-TX-2T
OEM Part # N/A

View More

You Might Like